Driving A Motor Bike

Guide for learning many important things about a motor bike

Table of contents

Chapter one
Chapter two
Chapter three
Chapter four
Chapter five
Chapter six
Chapter seven
Chapter eight
Chapter nine

1

Motor bike is a common item used for transport. There are many models in bike which are used all over the world. Basic functions and operations of a bike are similar in all types of models.

Handle of the bike provides race on right side and clutch on left side. Brakes are also available with race side in bike. Balancing is important for riding a bike. If you are able to have a good balance on bike then you can operate the complex functions.

There is a kick on the right side of bike which is to be operated through foot. You must use key to start the bike which is located on the section of meter. First of all you must use the key to start the bike and it will show that the bike is in neutral position. Light will glow in neutral section which is shown through meter.

Key in bike could not be taken out when the bike is in active mode. When you have placed the key and your bike is active then you must use your foot for starting through kick.

Some race must be given so that you remain safe from missing in kicks. One kick is sufficient to start the bike when you are giving some race. Then hold the clutch and use your left foot for gear. First gear must be applied while holding clutch and giving some race.

Then release the clutch slowly and give race at the same time. This will move the bike. You can rest your feet on sides, on the paddles, which are made on both sides of your bike. Then you can check the speed on your meter while your bike is moving. When the race is not increasing further then it is time to increase the gear.

Use clutch and end race for entering in second gear. It is important to use clutch while changing gears so that you can remain safe from problems of stucking of gears. Then you can increase speed and increase gears with time. Many bikes have four gears and there are no more gears.

You can give more 'race' when you have applied all the four gears to increase speed. You can increase gears in the front side and decrease the gears in the back side. Use your left foot to operate gears. Use clutch when you have to increase or decrease gears and use race after operation of gears. Indicators are present on both sides of bike.

2

Front and back side of bike has indicators so that you can tell others that you are about to turn to any side. There is a large light in front which is helpful for finding way at dark or night. A light is located in back side to show that the bike is moving which is helpful in dark or night. Same key is used for opening the fuel tank of bike which is used for starting the bike.