Rakuten Kobo Inc Publishing: 29 books

From the literature it has been found out that optimization is done on MIG welding process parameters   AA 5456 weldments using DOE. Taguchi is used mostly in all optimization process. The main objective of this work is to optimize the MIG welding Process parameters on AA 6061 to yield maximum ultimate...

In this venture a Bubble-Type humidification technique is utilized as a part of a PEM energy unit examination to enhance the effectiveness of the framework and the life time of the film is made strides. It likewise expands the dampness content in the layer and influences the reactant to gas stream...

To avoid Lack of Penetration Weld joints must not be narrow, Welding current should be adjusted to appropriate level, Electrode feed must be in a control level, Wire should be placed at the centre of grove, Arc length should not be too long, and Rotation of the chucked must be control, sufficient...

Christo Ananth et al. [26] gave a brief description and solved problems for students in Bahrain to know about Centroids and Center of Gravity of Common Shapes of Areas.

           In this investigation an attempt has been made to study the effect of various composition of boron carbide powder reinforced with zircon sand in aluminium matrix composite. From this investigation the following important conclusions are derived: Detailed literature survey has been...

Ration Distribution System means distribution of essential commodities to a large number of people. It is done by the government. Public distribution system is one of the widely controversial officers that involves corruption and illegal smuggling of goods. All these happen because every job in the...

Christo Ananth et al. discussed about PN junction diode, Current equations, Diffusion and drift current densities, forward and reverse bias characteristics and Switching Characteristics of Semiconductor Diodes.

Christo Ananth et al. analyzed JFETs, Drain and Transfer characteristics,Current equations, Pinch off voltage and its significance, MOSFET- Characteristics, Threshold voltage, Channel length modulation, D-MOSFET, E-MOSFET, Current equation - Equivalent circuit model and its parameters, FINFET,DUAL GATE MOSFET in Field  Effect Transistors. 

Christo Ananth et al. analyzed NPN, PNP Junctions, Early effect, Current equations, Input and Output characteristics of CE, CB CC, Hybrid -π model, h-parameter model, Ebers Moll Model, Gummel Poon-model and Multi Emitter Transistor in Bipolar Junctions. 

Studying about Forces System and addition of forces by summing components

Christo Ananth et al. gave a brief description and solved problems for students in Bahrain to know about Friction, Characteristics of Dry Friction, Application Analysis, Theory of Friction, Angles of Friction, Wedges and Square Threaded Screws.

Christo Ananth et al. gave a brief description and solved problems for students in Bahrain to know about Concept of Moment of Inertia, Polar Moment of Inertia, Radius of Gyration and Transfer Formulae.

Christo Ananth et al. gave a brief description and solved problems for students in Bahrain to know about Turning Effect of force, Moment Characteristics, Principle of Moments and Summing up of moments.

Christo Ananth et al. gave a brief description and solved problems for students in Bahrain to know about Trusses, Method of Supporting Beams, Analysis of Structures by Method of Joints & Sections, Reason about why to use Trusses and why not to use Trusses.